System type: 3 units, 2 frequency division and phase inversion
Transducer configuration: ferrite low frequency driver 10″×2PCS
Ferrite high frequency driver
3″×1PCS
High frequency waveguide horn
1.5 "x (38 mm throat) × 1PCS
Maximum sound pressure level (Pmax@1m): 129dB
Frequency bandwidth (-10dB): 55Hz-20KHz
Nominal directivity (-6dB): 110ºH*10ºV for a single array module, vertical angle adjustable 0°～10°, unit adjustment angle
1°(Note: The vertical coverage angle of the line array varies according to the angle and curvature of the array)
Recommended number of arrays: ≥4
Rated parallel number: ≤2
Power amplifier control: built-in DSP processing, RJ485 network port, Mic/Line XLR plug, gain adjustment
Power requirements: AC220V
Output level: Class D
Power: 1250w (850W*1+450W*1)
DSP: 96KHz sampling 24 bit rate
Damping coefficient: >300 (10-400Hz, 8ohms)
Hardware specifications
Box material: 15mm (0.6″) birch plywood
Hanging hardware: professional adjustable angle hanging piece
colour:
The default is black polyurea spray, other colors can be customized according to requirements
Box size: W700mm*D305mm*H500mm
Weight (each): 34.55kg
Gross weight (single pack): kg
